Aluminium
Information
Anti corrosive, alkyd resin-based aluminium paint for protecting metal surfaces indoors and outdoors from corrosion and decorative finish. Suitable for painting metal poles, partition walls, fences, doors, gates, railings, trailers, radiators, and other metal surfaces. Forms a silver-colored coating after drying.
INSTRUCTIONS FOR USE
Surface preparation.
Before applying the paint, clean the surface from dirt and any stains of corrosion (rust). When the surface cannot be completely cleaned from rust stains, loose rust must be removed and the surface must be sanded using sanding tools (abrasive paper, wire brush, a grinding tool, etc.). However, anti-corrosive protection in this case will be lower.
Application.
May be applied directly on steel or primed surfaces.. Mix well before use, and, if necessary, dilute with wait spirit or other type of thinner (0–5 % by volume for applications with roller or brush. Use the same thinner to clean the tools. Paint application by spraying allowed only in industrial paint shops. Apply 1-2 coatings on primed surfaces using an airless sprayer, a brush, or a roller, and in case of unprimed surfaces 2 to 3 coatings may be required. Painting conditions: ambient temperature above +5°C, relative humidity below 85 percent. The paint is ready to use. Apply paint at ambient temperature from +5 to +30°C. Protect from frost!
Amount of paint required. Coverage: 8-10 m²/l