Parquet Varnish Gloss
Information
Intended use.
It is a one-component water-dilutable glossy parquet varnish made on the basis of acrylic polyurethane dispersion. Varnish for parquet and wooden flooring in residential premises and high-traffic public spaces. Forms wear-resistant glossy film when dry. Not suitable for varnishing certain types of beech tree and diamond pine parquet.
INSTRUCTIONS FOR USE
Surface preparation. The surface must be clean, dry and free from sanding dust. Inside, the ambient and surface temperature cannot be lower than +10°C, and relative air humidity must not exceed 80 percent. Avoid direct sunlight and draughts when varnishing floor.
Application.
Priming recommended before varnishing. Apply 1 coat of primer using a brush or a roller or 2-3 coats using a special varnishing spatula. Wait at least 6 hours until the primer coating is dry. Sand the surface after priming. When priming using a special steel varnishing spatula, sanding of the primed surface is usually not necessary. Mixing before use recommended. Apply 2-3 coats (beside the primer coat) of varnish using a brush or a roller. Apply an even layer of varnish to avoid runs. Surface drying time – 4 hour when ambient temperature is +20 °C . Apply second layer no earlier than after 5 hours. The surface may be walked on after 6 hours. Drying takes longer when the ambient temperature is lower. It takes 1 week for the varnish to fully cure. Wait at least 1 week after varnishing before laying carpets, putting furniture, cleaning the floor with a moist cloth, or applying protective wax. Wash tools with water. Clean the remains of dry varnish with acetone or thinner 646. Store in a tightly closed container at the temperature above + 5° C.
Amount of paint required.
Coverage per coat: 8–10 m²/l when applying with the help of a roller or a brush; and 20–25 m²/l when applying with the help of steel varnishing spatula.